| After-sales Service: | One-to-One After-Sales Service |
|---|---|
| Warranty: | 10years |
| Type: | Chain Sling |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
G80 Chain Sling assembly slingle leg/2 legs / 3 legs/4legs -
-Surface treatment: Power coated with mark WLL, Size, Grade, Batch No.
- Application: Used in connecting operation
- Special specification and marks can be made according to customers
- Packing: Packed in Wooden Case or Requirements
- B. L= 4 times*WLL
- Full tracebility
- Proof tested to 2 ½ Times working load limitDetailed specificationsSingle leg chain sling
| Chain dia(mm) | WLL(ton) |
| 6 | 0.6 |
| 8 | 1.5 |
| 10 | 2.5 |
| 12 | 4 |
| 13 | 5 |
| 14 | 6 |
| 16 | 8 |
| 20 | 12 |
| 24 | 14 |
| 32 | 20 |
Two legs chain sling
| Chain dia(mm) | WLL(ton) |
| 6 | 1.2 |
| 8 | 3 |
| 10 | 5 |
| 12 | 8 |
| 13 | 10 |
| 14 | 12 |
| 16 | 16 |
| 20 | 24 |
| 24 | 28 |
| 32 | 40 |
Three legs chain sling
| Chain dia(mm) | WLL(ton) |
| 6 | 1.8 |
| 8 | 4.5 |
| 10 | 7.5 |
| 12 | 12 |
| 13 | 15 |
| 14 | 18 |
| 16 | 24 |
| 20 | 36 |
| 24 | 42 |
| 32 | 60 |
Four legs chain sling
| Chain dia(mm) | WLL(ton) |
| 6 | 2.4 |
| 8 | 6 |
| 10 | 10 |
| 12 | 16 |
| 13 | 20 |
| 14 | 24 |
| 16 | 32 |
| 20 | 48 |
| 24 | 56 |
| 32 | 80 |
Care in use
1. For hooks used in frequent load cycles or pulsating loads, the hook and threads should periodically be inspected by Magnetic Particle or Dye Penetrant. (Note: Some disassembly may be required. )
2. Never use a hook if its throat opening has been increased, or its tip has been bent more than 10 degrees out of plane from the hook body, or is in any other way distorted or bent. Note: A safety catch will not work properly on a hook with a bent or worn tip.
3. Never use a hook that is worn beyond a recommended maximum of 8%.
4. Remove from service any hook with a crack, nick, or gouge. Hooks with cracks, nicks, or gouges shall be repaired by carefully grinding lengthwise, following the contour of the hook, provided that the reduced dimension is within the 8% wear limit.
5. Never repair, alter, rework, or reshape a hook by welding, heating, burning or bending.
6. Never side load, back load, or tip load a hook.
7. Eye hooks, shank hooks and swivel hooks are designed to be used with wire rope or chain. Efficiency of an assembly may be reduced when used with synthetic material.
8. Always make sure the hook supports the load. The catch must never support the load.
9. When placing two sling legs in a hook, make sure the angle from the vertical to the outermost leg is not greater than 45 degrees, and the included angle between the legs does not exceed 90 Degrees.
10. The WLL of a hook applies only when the load is correctly positioned on the load line of the hook. If the hook is eccentrically loaded, or the load is applied other than on the load line, the WLL is greatly reduced.
11. Always use a swivel hook, or insert a swivel link between the load hook and the lifting rope, when the load has a tendency to rotate when lifted.
12. Always check to ensure that the hook safety catch has closed correctly before allowing the load to be lifted
Real show
Technology
Quenching treatment
1.Alloy steel foring, Heat treatment
2.G80 grade managanese steel hook, Solid and durable
3.Strong Card in clasp, Solid and secure
4.Brand new hook head design make the goods unhooking
Applications
Matters need attention
Chain rigging is a rigging with a chain of metal chains divided into single and multiple etc.made of quality alloy steel.Characterized by abrasion resistance, high temperature resistance, low ductility.no elongation after stress, etc for Large-scale, frequently used occasions.
***Lifting instructions
Professional qualifications.Q1: Does your workshop have products in stock?
A1: Yes, we have. But we only have standard-sized products; if you need customized products, it will take some time to manufacture them.
Q2: Whether you can offer customized service?
A2: Yes, the working condition of every customer is different. All of our products can be customized depending on customers' requirements. Please give us the information as straightforward as you can, so we can provide our best design to suit your demands.
Q3:What's the information should I provide when inquiry?
A3:More details or drawings, better. A: Lift capacity B: chain length C: surface D: packaging demands you give us will be more appreciated.
Q4: What kind of package for the chain sling?
A4: Hoists and Electricals packed in wooden fumigation box.
Q5:How long is your delivery time?
A5: Generally it is 5-10 work days if the goods are in stock. or it is 15-20 work days if the goods are not in stock, it is according to quantity.
Q6:Can you give warranty of your products?
A6: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
Q9: Do you provide accessories?
A9: Yes, as a manufacturer, we can provide all related accessories.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}